DATRLF1014 Fiberglass Quick Pop Up Shelter System
10'' W x 14'' L x 8'' H - 2 windows (one on each side) 1-14" HVAC/clothes ducts inlet/outlet with tie closures.
Lightweight reinforced fiberglass, self supporting, quick erect pop up style shelter system that requires no tools and no extra parts to assemble. Comparatively lightweight, these shelters are easily assembled in approx. 3 minutes by 2 personnel. Safe to use in all environs - these units are completely non-conductive vs. metal framed competitors. EMS Blue colored UV/Chemical Resistant and Fire Retardant Canopies. Complete with tie down ropes, stakes, carry bag, and manual. Units can also be attached end to end with tent like structures, fold up tie down doors on each as standard.
ALL FSI SHELTERS REGARDLESS OF SIZE GENERAL SPECIFICATIONS
Air pressure internally once inflated = 4.3 psi (0.3 bar)
USA Federal Standard FS # 191 5041/5102/5134/5970 Test method structural test results
-
Total Weight (g/m2) – 1055
-
Thickness (mm) – 0.90
-
Cut strip tensile strength (lbs. /in.) – Warp = 450 - Weft = 404
-
Elongation (%) – Warp = 30 - Weft = 47
-
Tongue tear (lbs.) – Warp = 87 – Weft = 100
-
Adhesion (lbs. /in.) – Warp = 9.4 – Weft = 8.9
-
Density = 30 X 24.5
Frame: Heavy duty 1100 dtex polyester coated w. plastomer on both sides, UV/chemical resistant. Cover: Heavy duty 420 denier nylon coated w. polyurethane (PVC) on both sides. UV/chemical resistant/fire retardant. Floor: PVC coated .52 mm polyester.
Standard color is ‘EMS’ Blue exterior w. high visibility white inside color. Green and White exterior canopy color also available at no extra cost. Other colors optional with an extra charge.
All Shelters have full privacy zipper closure and full screen zipper closure slip in and out dirty entry/clean exit doors, air inflation valve, one air inflation hose w. safety cord, pressure relief valve, tie down ropes and 4 D-rings to tie off to, repair kit, manual, carry bag, 2 upper air vents, and a hammer. All canopy walls are velcro’d to the floor air berms for air lock, and reflective striping is found on the upper air vents above doors and on entry and exit integral shower stall air berms. Units can attach to a second shower or FSI shelter. Simply inflate the unit and commence use in approx. 1 - 4 minutes (size of shelter dependent).
Every FSI DAT™ series shelter comes complete with electric inflator/deflator, and high pressure scba fitting. | 
|
