AS1-BCS1 Bump Check Station
The Bump Check Station™ is fully automatic and requires no electricity, so it can be safely mounted on a wall near the area where you store your gas meters or carried with you to anywhere in your facility.
Simply attach the sample tubing from the Bump Check Station™ to your gas meter. The pump will sample the gas from the cylinders as you confirm that all the sensors alarm to the gas. A simple step-by-step procedure specific to your gas meter is included with every Bump Check Station™.
The Bump Check Station is the easiest way to confirm the sensors in your gas meter will respond to gas. In less than a minute, you’ll know for sure if your instrument will alarm when it should.
Items included in the Bump Check Station:
|
Qty |
|
|
AS1-BCS1-NG |
AS1-BCS2-NG |
Description |
| 1 |
1 |
Carry Case - Fits 2 Gas Cylinders |
| 1 |
1 |
Mounting Bracket with Screws |
| 1 |
2 |
Demand Flow Regulators for use w/Reactive Gases |
| 1 |
2 |
Larger Tubing 3/16" x 5/16" |
| 1 |
2 |
Male Luer Integral Lock Ring to 200 Series Barb, 5/32' (4 mm) ID Tubing |
| 1 |
1 |
Instruction Card |
Please note that the Bump Check Stations do not include gas. Please go to the Calibration Gas Home page to purchase your gas.
