SYSTEM INCLUDES
-
Initial pre-cleaning (FK260-G), disinfecting (FG350-G) and rinse agent (RP355-G) chemistries
-
Unlimited chemical and cycle options
-
One year parts and labor warranty
The GS5000 is the ultimate washer for high volume mask washing. Easily accommodates 24 full-face or 48 half-masks per cycle. Constructed of 16-12 gauge, stainless steel and manufactured with 100% corrosion resistant parts, the GS5000 Respirator Washer is ideal for even the harshest environment. All washer functions are automatic. Cycle times and chemical amounts can be modified to conform to any cleaning situation. Six powerful spray nozzles powered by a three horsepower motor provide complete top and bottom coverage to all equipment surfaces. Our innovative tank design allows for a high volume of equipment to be cycled, while using a minimum of water and chemistry.
SAFE AND EASY TO USE
A true multi-use washer that automatically pre-cleans, disinfects, and rinses at the push of a button. Automatic chemical injection ensures a precise wash – cycle after cycle. The GS5000 provides a low temperature bath that assures a minimum of wear and tear on personal protective equipment.
GUARANTEED
A one year parts and labor warranty, and compliance with ANSI, OSHA, and CSA Standards. The GS5000 incorporates a combination of the most effective detergent, disinfectant, and rinse chemistries to ensure the best automatic wash possible and protect workers against today’s health threats. Guaranteed not to harm the facemasks of any respirator manufacturer.
ADAPTABLE
The GS5000 features our unique menu driven wash control program. Simply by entering the program mode, the operator may adjust the cycle length, the number of cycles, and the chemical injection amounts. The GS5000 Respirator Washer cycle can be easily customized to fit your cleaning requirements — no additional software or hardware necessary!
SPECIFICATIONS
|
Electrical
Power Cord: 8 ft
Plug: NEMA L14-30P 30 Amp Twist-Lock
Power Supply: 240 Volts, 50/60 Hz, 23 Amp, 1 phase
Connect To: 30 Amp Breaker |
Cycle Time
User Determined
Typical Cycle: 20 Minutes |
|
Water Supply
Inlet: 3/4" ID hose with 3/4" GHT
Pressure: 50 psi (Max: 75, Min: 40)
Temperature: 110°F (Recommended) (140°F Max) |
Capacity per Cycle
Full-face Masks: 24
Half-face Masks: 48
Baskets: 3 (20" x 20" x 7"(H)) |
|
Drain
Length: 6 ft with 3/4" MNPT Fitting
Height: 3 ft (Max) |
Pump Size
3 hp (Wash Pump)
1/10 hp (Drain Pump) |
|
Dimensions
Height: 38.5"
Depth: 37"
Length: 73.5"
Weight: 500 pounds |
Water Requirements
Gallons per Wash: 18 (Average)*
Gallons per Cycle: 6 |
* Water usage is determined by cycle selection.
Technical Manual
